If your iPad 4 won't charge via Lightning or the glass is cracked, we'll check it free while you wait and give you a final price.
A tablet with a Lightning port is getting on: the glass cracks, the battery fades and sometimes the board needs work.
A web of cracks after a drop; with an intact panel only the glass changes.
The screen blinks and shows bands: the display cable or the panel is to blame.
A tablet this age holds little charge and shuts down in the cold.
Lint and corrosion in the port, a wobbling plug, charging at one angle only.
A black screen with no logo: the battery, power supply or board is at fault.
A spill, a surge or a knock damaged the power-management chips.
It registers every other press because its cable is worn or dirty.
Corrosion around the port and on the board after a spilled drink.
Movies sound muffled, with crackling at full volume.
The Camera app shows a black screen on both cameras.
The network icon drops as soon as you move away from the router.
The keys on the edge sink in and don't change the sound level.
What you pay depends on the fault and on whether the part is original or aftermarket.
| Service | Original | Aftermarket |
|---|---|---|
| Battery replacement | 28 900 ₸ | 16 900 ₸ |
| Display replacement | 44 900 ₸ | 27 900 ₸ |
| Display glass replacement | 26 900 ₸ | 14 900 ₸ |
| Charging port replacement | 24 900 ₸ | 13 900 ₸ |
| Main camera replacement | 24 900 ₸ | 13 900 ₸ |
| Front camera replacement | 60 900 ₸ | 33 900 ₸ |
| Home button replacement | 24 900 ₸ | 13 900 ₸ |
| Button replacement | 69 900 ₸ | 38 900 ₸ |
| Speaker replacement | 24 900 ₸ | 13 900 ₸ |
| Microphone replacement | 24 900 ₸ | 13 900 ₸ |
| Housing replacement | 58 900 ₸ | 32 900 ₸ |
| Flex cable replacement | 21 900 ₸ | 15 900 ₸ |
| Other repairs | Price | |
| Logic board repairmicrosoldering · 1–3 days | 76 900 ₸per job | |
| Water damage cleaningcorrosion cleaning · diagnostics up to 2 days | 13 900 ₸per job | |
| Wi-Fi module repairwireless module · board-level repair | 21 900 ₸with parts | |
| Firmware flashingsoftware restore, no parts replaced | 10 900 ₸per job | |
The technician confirms the exact price after diagnostics, especially when the board is involved.
Glass, display and battery come in both versions, and the right one depends on the tablet's job.
An older iPad is usually worth reviving, and we say where a glass swap is enough and where board repair is needed.
We have worked with Apple devices for eleven years and know the iPad 4 generation well: its adhesive, cables and power.
Completed work is covered up to 1 year, and the technician states the terms before the repair begins.
Our technicians are experienced and do more than swap parts: when symptoms point to the board, they diagnose that too.
If the panel is whole, only the glass can be replaced, the thriftiest way to put the tablet back to work.
We operate in both cities, Astana and Almaty, on identical terms and with the same approach.
Weekdays 10:00–19:00, weekends and holidays 11:00–18:00, so choose the time that suits you.
The tablet slipped onto the tiled yard — the touch glass cracked, but the image and touch response were fine. We replaced the touchscreen, kept the original matrix, and checked touch across the whole screen — the tablet works like new.
A client from Astana complained that the iPad 4 was draining quickly and shutting down even with charge left. We replaced the battery and checked charging — now the tablet works fine.
A client from Astana brought in a tablet that had stopped charging: the cable sat fine, but no charge went in. We replaced the charging port flex and tested it — the tablet charges from the cable again.
Usually the whole journey — from message to pickup — takes less than an hour; complex repairs follow the timeline in the receipt.
Book a repairYou send a photo of the damage on WhatsApp — we quote the price and available time. Or you call a courier.
An engineer checks the device in front of you and shows what is broken. 0 ₸, even if you decline the repair.
We fix the price, the part (original or analog), the timeline and the warranty. You sign — we start.
Before installation we show you the new part in its factory packaging. You wait in the waiting area with coffee and Wi‑Fi.
Screen and touch, Face ID or Touch ID, cameras, microphones, speakers, charging, Wi‑Fi. You check together with the engineer.
Together with the receipt, warranty card and the old part. Payment — Kaspi, card or cash.
Technicians for iPhone, Mac, iPad, Apple Watch and AirPods repair.
Photo: Bakmukhammed S.
Photo: Galymzhan S.
Photo: Zhandos Sh.
Photo: Darkhan T.
Photo: Kudiret S.“If the repair didn’t suit you or you have a complaint, write to me personally.”
Send a photo of the fault — an engineer will reply on WhatsApp, give the price and a time you can come in.
iPad 4 Repair in Astana for Screens, Batteries and Charging
For iPad 4 repair in Astana, iServices replaces the separate glass over an intact LCD, swaps the glued-in battery and rebuilds the Lightning port, with most jobs done from 1 hour to 1 day. We show the new part in factory packaging and give a warranty up to 1 year.
The fourth generation left the production line years ago, yet its aluminium body, separate front glass and cell are all repairable. Below we explain which faults bring it back into service and which make a write-off the honest answer.
We advise repair when the LCD is intact and the fault is glass, the cell or the charging port, and we say so plainly when a board fault on a device this old is not worth the outlay. A shattered front on a working matrix is the clearest case: the panel still renders, touch still registers, and the fix stays small. A swollen pack is the second, because a fresh one restores a full day of use and removes the pressure that distorts the frame. The opposite applies to a shorted logic board with corroded traces, where labour outweighs the result. A free 15-minute check in front of you settles the question faster than any estimate over the phone, because the engineer can see whether the matrix survived the impact.
Before handing over the device, make an iCloud or computer backup, note your Apple ID password and switch off Find My iPad so the tablet can be tested freely after reassembly. It runs an older iPadOS build, so check that the backup actually completed rather than trusting the progress bar — large photo libraries on a slow connection stall silently. Write the passcode down for the engineer instead of removing it, because the full function test after service needs the home screen unlocked. A backup matters more on an old device than a new one, because a cell that has been swelling for months can fail outright during the first charge after service. Keep the old part with the receipt as well; the original glass or power pack is useful evidence if a question arises later.
On the fourth-generation tablet the touch layer and the LCD are separate parts, so in most cases only the top layer is renewed. Here is how that construction works and what happens to the Home button.
On the iPad 4 the touch glass and the LCD are separate parts, so when the matrix is undamaged we replace only the top layer and keep your original display. The digitizer sits on a bead of adhesive inside the aluminium frame, and the panel below it stays untouched. Our technician warms the perimeter on a heating plate until the glue softens, then lifts the layer gradually with a thin blade. The whole separation takes minutes, and the body keeps its shape because the heat is even. This bonded layer must be warmed and lifted slowly; a cold pry is what turns a glass-only job into a full module replacement.
The Home button on this generation carries no fingerprint sensor, so it is simply transferred to the new glass and keeps working exactly as before. The small flex cable under the key is lifted with a spudger, moved across and reseated, while the volume and power keys stay in the body untouched. There is no pairing step, no software lock and no recalibration. On later models with Touch ID the key is paired to the board and must travel with the screen; knowing which design you own explains why some swaps cost more labour than others. The same logic applies to the mute switch — it lives in the body, so it never enters the job.
Power faults are the second most common reason this device reaches our bench. Below we separate a tired battery from a failing socket, and explain why a swollen pack is a safety matter rather than a cosmetic one.
The power pack is glued beneath the display, so we warm and lift the front panel first, then free the module from its adhesive bed and seat a new one before resealing the chassis. A heating platform softens the adhesive evenly, which keeps the glass intact while the panel comes away from the aluminium. The swollen pouch itself is pried out with a non-metallic tool — metal near a punctured pack is how fires start. We then clean the old glue channel, lay fresh adhesive and press the panel back down. Because the display has to come off anyway, a cell swap on this model is the moment to have a tired glass layer replaced in the same visit rather than paying for the opening twice.
We work through a no-charge unit in a fixed order, starting with the cable and adapter, then the Lightning connector and its flex, then the battery and finally the power controller on the board. A bench power supply shows whether the unit draws current at all, and how much, before anything is opened. If the draw is normal but the socket is loose, the flex is the suspect; if the draw is zero, the controller or a logic trace is. The Lightning port on this model collects pocket lint that compresses into the back of the socket, which mimics a dead port until it is cleared out with a fine tool. Owners in Astana often replace three cables before bringing the device in — the socket is the usual culprit, not the accessory.
On this generation the component you pick changes colour, touch response and how long the layer lasts, so the choice deserves a look before anyone opens the tablet. We compare both options on the points owners notice day to day.
| Parameter | Original part | Aftermarket part |
|---|---|---|
| Colour and brightness | Matches the factory panel | Close, may run slightly cooler |
| Touch response | Factory feel across the surface | Good, occasionally firmer at edges |
| Battery behaviour | Rated capacity as designed | Slightly lower real-world runtime |
| Warranty cover | Up to 1 year | 6 months |
| Typical choice | 64% of customers | Chosen for budget-fit jobs |
Before any work begins we write the component type, the turnaround and the cover onto the receipt, and the sealed unit is opened in front of you before installation. The engineer shows the item in its factory packaging, so you see what you are paying for rather than hearing about it afterwards. That single line on the receipt settles the argument later: a document that names the component is what lets you compare two quotes honestly, because a lower figure usually means an aftermarket layer rather than a discount on the same item. Ask for the name in writing wherever you take the tablet — it is the cheapest protection you have.
Turnaround depends on the failed part: screen and battery jobs fit into an hour or two, while board-level work needs several days. Below is how to hand the device in and what to test at pickup.
| Work type | Typical turnaround | What we check before handover |
|---|---|---|
| Front glass replacement | 1 to 2 hours | Touch across the full surface |
| Battery replacement | 1 to 2 hours | Charge behaviour and frame seating |
| Lightning port and flex | 1 to 2 hours | Charging with cable and adapter |
| Board-level repair | 1 to 3 days | Power rails, charging, network |
| Water damage | Up to 2 days of diagnostics | Corrosion, board, all functions |
Send a photo of the damage on WhatsApp and an engineer replies within 5 minutes with a price and a free time slot, and a courier can be called if you cannot come in. Photograph the crack straight down rather than at an angle — the position of the break hints at whether the LCD underneath survived, and that decides whether the job is a panel swap only or a full module. Once the slot is confirmed, price, part choice, turnaround and warranty are fixed on the receipt in about 2 minutes before any work starts, and the new component is shown in its factory packaging. Booking an iPad 4 repair Astana slot early in the day leaves room for the same-visit finish most quick jobs get.
A cracked front, a swollen cell or a charging fault on an older tablet all come down to one question: is the rest of the hardware healthy enough to justify the work.
On a tablet this old, the decision to repair rests on whether the matrix and board are healthy, so a short in-person check answers the question better than any remote estimate.
Did not find an answer? Message us on WhatsApp: an engineer replies, not a bot.
Ask a questionLook at the charging port: the iPad 4 has the small Lightning connector, while the iPad 3 has the wide dock connector. The two look almost identical otherwise, so the port is the easiest check before ordering parts.
Yes, the cable is the same, but a small phone adapter charges the iPad 4 very slowly. If even a tablet adapter does not charge it, the Lightning port, battery or charging circuit should be checked.
The iPad 4 stopped receiving updates at iOS 10, so the tablet correctly reports that nothing newer is available for it. Repairs do not change that, and some current apps will not install.
Yes, the two tablets have the same body shape and magnet layout, so the cover fits and wakes the iPad 4. If it stopped waking the screen after a fall, the engineer checks the sensor during diagnostics.
Switch it off, wipe it, and do not charge it or put it in rice. Bring the iPad 4 in as soon as you can, because sugar in the drink speeds up corrosion on the board.
Yes, for reading, video, video calls and as a child's tablet it still works well after a new glass or battery. For modern games and heavy apps it is too old, and the engineer will say so frankly before you spend money.
On most iPads the glass, touch layer and display are one sealed module, so a glass-only swap is often impossible. An engineer confirms it for your model.
Most charging faults come from the cable, the port or the battery. Here is how to tell which one and what to do next.
Decide whether to fix or replace your old iPad with a clear look at costs, turnaround and part options.
A case with raised edges, tempered glass and a few tablet settings keep a child's iPad intact.
Back up your data, turn off Find My, and bring proof of purchase — then the repair starts faster.
MacBook
iMac
Mac mini and Studio
Apple Watch
AirPods
Apple Pencil
Apple TV
HomePod